You can rest assured to buy vape shell from our factory and we will offer you the best after-sale service and timely delivery. Depending on the advanced processing facilities,an experienced hi-tech team and the excellent after-sale service,marked all over the country as well as exported to the overseas and we have achieved a create reputation from our customers. We would like to create a wonderful future with numerous customers together.
Our vape shell can select low-density and high-strength aluminum alloy as raw material according to the design requirements of the drawings.
The chemical composition and mechanical properties of the raw materials are strictly inspected to ensure that they meet the technical requirements, and the materials are required to be tested to obtain relevant test reports such as MSDS and SGS.
The aluminum rod is hot-melted and extruded to obtain the aluminum profile with the required cross-sectional shape. And the produced profiles are inspected.
The material clerk picks up the materials and inspects whether the materials meet the requirements of the drawings. The technical supervisor formulates the processing procedures according to the drawings, and designs and manufactures suitable fixtures. After the above preparations, the technical supervisor starts to adjust the machine. After the parts are processed, the first piece is inspected. The quality supervisor confirms that the first piece is qualified before mass production. During the mass production process, random inspections should be carried out to avoid quality problems of parts due to other factors such as the wear of the knife particles and the failure to replace them in time.
Polishing tools are used to modify the surface of the parts to obtain the required glossiness. During polishing, the high-speed rotating polishing wheel is pressed against the workpiece, so that the abrasive rolls and slightly cuts the surface of the workpiece, thereby obtaining a bright processed surface.
Surface treatment:
1. Cleaning:
Use a professional cleaning agent to clean the oil and dust on the surface of the parts.
2. Deoxidation layer:
Remove the oxide layer on the surface of the parts, either chemically or mechanically.
3. Descaling:
Clean the rust and rust spots on the surface of the parts.
4. Polishing:
Polish the surface of the parts to make it smoother. Use 180~240 grit sandpaper for polishing.
Primer:
1. Physical and chemical treatment: Use chemicals to clean the parts and remove impurities.
2. Primer spraying: Use special spraying equipment to spray the primer evenly on the surface of the parts, and evenly cover the surface coating of the parts.
3. Drying: Place the sprayed primer in a constant temperature and humidity environment to dry.
Topcoat:
1. Topcoat spraying: Use special spraying equipment to spray the topcoat evenly on the surface of the parts.
2. Drying: Place the sprayed topcoat in a constant temperature and humidity environment to dry.
Baking:
1. Dry the parts and put them in a special baking room for drying at a temperature of about 130°C.
2. After baking, a tough paint film is formed on the surface of the parts.
Quality inspection:
The quality inspection process should start from the raw materials, then the mechanical production process, and finally the final inspection of the finished product. Inspections are required at every link in the production process to ensure that vape shell will not have quality problems during the production process.
